1
Hi, Guest!

  LOKASI :  Purwokerto

  AKTIVITAS :  13/10/2019

BAGIKAN :   

Bagikan :
Masukan Data Diri Anda
Nama harus diisi !
Email harus diisi !
Format email harus someone@example.com !
CV BERKAH AMANAH PURWOKERTO, MITRA TERPERCAYA UNTUK KEBUTUHAN ALAT UKUR ANDA

Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester

Update Terakhir
:
10 / 06 / 2019
Min. Pembelian
:
1 Set
Harga
Rp. 123
Bagikan
:
Kami adalah distributor alat pengukuran dan alat pengujian. Kami menyediakan berbagai macam alat uji dan alat ukur. Dengan moto pelayanan konsumen adalah yang utama, kami selalu berusaha memperbaiki diri demi pelayanan yang memuaskan. Kami Jual Alat Pengukur Murah dan Jual Alat Uji Murah

Detail Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester

Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester

Order Number:

  • HT-20,
  • HT-20T: Opening Size 25x25mm
  • HT-21: Opening Size 50x50mm
  • HT-22: Opening Size 100x50mm

APPLICATION Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester :

  1. Tests thin shaft > Æ 2 mm with V anvil.
  2. Tests small ball > Æ 2.5 mm with ball testing anvil.
  3. Tests small and irregular stampings with small supporting surface using slim raised spot anvil.
  4. Tests tin plate and cold-rolled sheet using HT-20 and diamond raised spot anvil.
  5. Tests thin-wall slim pipes > Æ 4.8 mm ( HT-20T) .

FEATURES Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester :

  1. Tests the superficial hardness of metals.
  2. The test principle and accuracy comply to standard ISO6508.
  3. With the bench stand it can be used on the desk as well as on site.
  4. Tests the hardness of thin plates, slim tubes, thin shafts, small balls and small stampings, workpieces with small supporting surface as well as parts requiring small indentation, replacing Vickers hardness tester.
  5. It is used for finished workpiece non-destructive hardness test directly. The small indentation is acceptable to most workpieces.

TECHNICAL PARAMETERS Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester :

  1. Initial Test Force: 3kg
  2. Total Test Force: 15kg, 30kg, 45kg ( for HT-20T 15kg only)
  3. Indenter: 120° diamond cone; Æ 1.588mm carbide ball; Æ 1.5288mm steel ball ( HT-20T only)
  4. Accuracy: Meets ISO 6508, ASTM E18
  5. Resolution: 0.5HR
  6. Testing Range: HRN, HRT, HRW, HRX, HRY, etc. 15 scales.
  7. Application: All metals including iron, steel copper, aluminum, Zinc, lead, tin, carburized steel, nitrided steel etc.

Kami Jual Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester

Tampilkan Lebih Banyak
cv berkah amanah
cv berkah amanah

CV BERKAH AMANAH

PREMIUM GOLD 5 Tahun
Kedungbanteng RT 1 RW 3 Kec. Kedungbanteng Purwokerto, Purwokerto
Indonesia 53152
Purwokerto
13 / 10 / 2019
Hubungi Kami

Detail Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester

Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester

Order Number:

  • HT-20,
  • HT-20T: Opening Size 25x25mm
  • HT-21: Opening Size 50x50mm
  • HT-22: Opening Size 100x50mm

APPLICATION Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester :

  1. Tests thin shaft > Æ 2 mm with V anvil.
  2. Tests small ball > Æ 2.5 mm with ball testing anvil.
  3. Tests small and irregular stampings with small supporting surface using slim raised spot anvil.
  4. Tests tin plate and cold-rolled sheet using HT-20 and diamond raised spot anvil.
  5. Tests thin-wall slim pipes > Æ 4.8 mm ( HT-20T) .

FEATURES Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester :

  1. Tests the superficial hardness of metals.
  2. The test principle and accuracy comply to standard ISO6508.
  3. With the bench stand it can be used on the desk as well as on site.
  4. Tests the hardness of thin plates, slim tubes, thin shafts, small balls and small stampings, workpieces with small supporting surface as well as parts requiring small indentation, replacing Vickers hardness tester.
  5. It is used for finished workpiece non-destructive hardness test directly. The small indentation is acceptable to most workpieces.

TECHNICAL PARAMETERS Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester :

  1. Initial Test Force: 3kg
  2. Total Test Force: 15kg, 30kg, 45kg ( for HT-20T 15kg only)
  3. Indenter: 120° diamond cone; Æ 1.588mm carbide ball; Æ 1.5288mm steel ball ( HT-20T only)
  4. Accuracy: Meets ISO 6508, ASTM E18
  5. Resolution: 0.5HR
  6. Testing Range: HRN, HRT, HRW, HRX, HRY, etc. 15 scales.
  7. Application: All metals including iron, steel copper, aluminum, Zinc, lead, tin, carburized steel, nitrided steel etc.

Kami Jual Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester

Tampilkan Lebih Banyak